|
WIFI Top Controller
So, you're looking to automate your Spyder top functions? You've come to the right place. The JNS WIFI Top Controller works together with a multichannel car alarm system to automate the Top and Tonneau functions of the Mitsubishi 3000GT Spyder.
FEATURES
 Remote control operation of convertible roof
 Remote control operation of tonneau
 Interfaces with most multi channel car alarm systems
 Interrupt and reverse direction of top or tonneau operation
 Automatic continuation after Safety Stop
 Adjustable closure timer
 Low standby current drain
 Small 2.6 x 4.25 x 1.12 footprint
 Easy installation
The system was originally designed to operate with the Audiovox APS-996A alarm which has been superceded by the APS-997 and APS-998 systems, but can work with any multichannel car alarm as long as there are at least 4 unused output channels and the channel outputs are grounded when active and open circuit when inactive.
The WIFI Top Controller ships with the electronics module and an 11 wire color coded wiring harness. The car alarm system must be purchased separately. Installation of the WIFI Top Controller itself is fairly straightforward due to the small number of wires however installation of the car alarm can take time for a new installer. Car audio shops have successfully installed the WIFI Top units for many Spyder owners so DIY is not a requirement. The WIFI Top Controller comes with a 1 year warranty from date of shipment.
Click below to purchase the JNS WIFI Top Controller - $270US
Stock on this custom item is normally low. Build time takes approximately 3 weeks if out of stock.
WIFI Top Controller - $270US **3 units available**
DOWNLOADS
Watch the Video!
© 2010 JNS Engineering
|